Compressed Air & Nitrogen Purged Drystor Low Humidity SMD Storage Cabinets

• Storing Surface mount Devices at low humidity to prevent moisture absorption and "pop corning" during the reflow solder process.
• Storing multi layer circuit boards.
• Low humidity storage of work in progress to prevent moisture absorption and oxidisation prior to completion of reflow solder process.
• Storing all moisture absorbing materials.
• Can be used as an alternative to baking components.
• With the heater option can be used as a slow bake oven at +40°C.

Models	DP1236HE	DP2463HE	DP1236HNE	DP2463HNE
Test Volumes (litres)	1236	2463	1236	2463
Internal chamber dimensions
Width in mm	805	1610	805	1610
Depth in mm	850	850	850	850
Height in mm	1800	1800	1800	1800

Humidity level in % RH

below 5%

below 5%

below 5%

below 5%

Number of doors	3	6	3	6
Number of shelves	6	6	6	6
Shelf load capacity	50 kg	50 kg	50 kg	50 kg
Electrical services (220/240 volts, single phase)	13 Amps	13 Amps	13 Amps	13 Amps
Compressed Air (oil & water free)	5-6 Bar	5-6 Bar	None	None
Nitrogen gas ( litres / minute)	None	None	10 approx	10 approx

Options:

• Cabinet heating up to +40°C with thermostatic control, offering a temperature stability of ±2°C and ±5°C spatial.
• Cooling to +20°C to compensate for high external ambient conditions.
• LRS232/RS422 or Ethernet communications.
• Additional shelves.
• Special storage arrangements e.g. reels or feeders.
• Standby air supply with automatic start up if air loss is detected.
• Data logging of humidity and temperature conditions.
• HEPA filters on air inlet.

T: +44(0)1495 305 555
F: +44(0)1495 303 595
E: sales@designenvironmental.co.uk